Jetek LogoNEW ADDRESS: 4329 Atlantic Brigantine Blvd, Brigantine, NJ 08203
Phone: 609-266-4700   Sales Email: sales@jetekpwc.com      Service Email: service@jetekpwc.com

Certified Mechanics: Polaris | Tigershark | Honda | Seadoo | Kawasaki | Yamaha

Sales and Service | Shrinkwrap and Storage | Rentals | Performance Modifications | Rebuilds

Jet-tek H2O Services

Jet-tek H20 offers a variety of high-quality services by certified mechanics.

If your jet ski is not performing quite up to par, now's the time to start thinking about freshening things up.  Jet-tek H2O Certified Mechanics can rebuild your tired engine, clean out your congested carburetors and fuel system, and overhaul your worn out jet pump.  Having your engine or jet rebuilt before your jet ski stops running will save you money - and keep you on the water next year.  All of our engine, carburetor and jet rebuilds are done in-house, not by some out of state company.  Poor performance may be due to a clogged fuel system, so if you've never had your fuel system cleaned and flushed, chances are you may need it.

After the season is over, don't forget to winterize, shrinkwrap, and store your personal watercraft (PWC) in a professional manner.  Let Jet-tek H2O take the worry and hassle from you and store your PWC  at our facility, ready to be unwrapped and delivered when the time is right.

While we can do just about anything for your PWC, here is a list of basic services Jet-tek H2O Certified Mechanics perform.

Winterizing  Winterization Special

Winterizing Your Personal Watercraft PWC, Jet Ski, Waverunner (all models) when the weather outside gets chilly is important for proper care of your watercraft to make sure it is in shape for when the water gets warmer and it's time to ride the waves again. Winterizing your PWC will help protect it against the off-season elements during storage and get you on the water sooner when the riding season starts.

Jet-tek H2O offers a complete winter special that includes: winterization, shrink wrap, and winter rack storage.  We also offer climate control storage if so desired.

If your needs are more special, we can customize a package for you.  Why Shrink wrap?   

$399
back to top

Summerizing

In Spring, when the weather starts to heat up, many people will be getting their jet ski out of storage and preparing it for another summer of fun. However, with your jet ski being stored for such a long time, it might not run exactly as it should. Hopefully, when you stowed your jet ski away last season, you winterized it. If so, you shouldn't have too many problems getting it running again. Otherwise you might want to consider summerizing.  

Jet-tek H2O offers summerizing services for all makes/models that include: General cleaning; checking the lines, plugs, carburetor, gas tank; making sure it has proper fluids, and ensuring it starts and runs as it should.
back to top

Engine Rebuilding

Jet-tek H2O can acquire rebuild kits for any make/model and series PWC.  Our rebuild services include new crankshafts, pistons, rings, circlips, wrist pins, top end bearings, complete gasket kits and crankcase sealant.  We also have performance kits that include ride plates, intake grates, sponsons, and steering nozzles for increased speed and performance.  Jet-tek H2O can also service new and rebuilt engines for crankshaft welding and rebuilding, cylinder honing, boring, resleeving and porting, and CDI modification.

Run into some bad luck?  Want your older PWC to run like new?  Whatever your PWC needs, Jet-tek H2O certified mechanics are here to to assist you, the PWC specialist.
back to top

Crankshaft Rebuilding

You could easily spend spend hundreds or more on a new Crankshaft, but why when you can have your old Crankshaft rebuilt?  Jetek knows the best replacement parts for any rebuild. Each Crankshaft is taken apart and checked against proper specifications.  If our certified mechanics find something not satisfactory, we will contact you to let you know before we proceed with the rebuild. We only use quality parts and ensure each Crankshaft is trued to better than OEM specifications. Welding is available upon request.
back to top

Shrinkwrap and Storage

During extended periods out off the water your uncovered PWC is vulnerable to damage from many of Mother Natures sources: rain/snow/sleet/hail; wind blown dirt and debris; bird droppings; nesting mice, birds, and other rodents; UV radiation; and dust. While a conventional cover or tarp offers some shelter from the elements, only a shrink-wrap cover gives it protection that’s 100% waterproof, near impossible to blow off, and can withstand heavy weathering. 

In August/September/October you should be thinking of Winterizing your PWC.  Jetek includes shrink wrap and storage as part of our Winterizing special package so your PWC is less hassle in the spring.
back to top

Performance Modifications

The goal of PWC performance modification is to offer the maximum possible overall power increase while making the minimum possible loss of reliability and power band range.

Jet-tek H2O offers performance mods for just about any make/model PWC and has exclusive experience that has allowed our very own Ronnie Walker to win numerous PWC racing trophies.
back to top

Jet-tek H2O Service Information

  • Please contact Jet-tek H2O for any/all questions regarding service. 
  • A work order must be created and signed before work can be performed.  A work order is required for any service performed by Jetek.
  • Estimates totaling $500 or more require a 50% deposit.
  • Jet-tek H2O is not responsible for anything left in the PWC/Jet Boat.  Please remove personal items prior to requesting service.
  • All invoices are subject to a 15% increase for every month left unpaid.
  • Any PWC/Jet Boat left after 14 days may be charged a $20 per day storage fee.

back to top